2007 Convention Zap (Raphael "Zap" Melendez)

Zap is an iconic figure.  You can argue the point.  But, everyone recognizes the original shoulder strap torso from 1982 as Zap's.  It is referred to as the "Zap" torso.  It's the least favorite of everyone when it comes to the original torsos.  But, it's Zap's: first and foremost.  Scrap Iron is also an iconic figure.  His overalls are a unique look from a classically colored villain from the line's formative years.  So, the combination of the two characters shouldn't make a figure that is able to stand on its own.  Yet, in 2007, there was a convention release of the Zap character that did just that.  And, it actually managed to pull off a pretty nifty new look for a classic character that also didn't tread on the torso's original use on Scrap Iron.

2007 featured the most ambitious convention set.  As it was the ARAH theme's 25th anniversary, the club forewent their mostly army builder formula and produced a set that was almost 1/2 Joes.  And, they used mostly unique parts.  (Though, the parts were relatively familiar as most had appeared on Comic Pack figures or in Toys R Us exclusive sets in the few years prior.)  It was a risky strategy.  But, it proved out as the set sold better than most of its predecessors.  And, within a few weeks of the convention, select characters from the set were selling for premiums.  It helped that most of the figures were fairly well done.  They featured thoughtful parts selection along with solid paint applications.  For many, the Joe side of the set was their personal favorite set the club produced.  

One of the reasons was that the colors used for the set weren't ones that were overly common in the vintage or repaint era.  This Zap perfectly showcases that with his leathery brown jacket and greyish-green pants.  These were visually interesting color palettes that didn't have precedence in the line.  The uniqueness made the figures stand out.  As the set was classic characters, many of whom were the only other use of Comic Pack era heads, collectors felt they weren't treading on beaten tropes like many prior sets.  Zap features a tamed cammo pattern that works due to the sparseness.  Rock and Roll and Grunt both had cammo patterns that were overkill.  And, they contrast the earnest simplicity of Zap's less ostentatious design.

At one point, I had multiples of all the figures in the 2007 convention set.  But, when it was time to purge my collection, few of them were able to make the cut as the best uses of their parts, mold or character.  I regret getting rid of figures like Sgt. Clay More and Doc.  They were very good figures.  And, I can't really explain why they didn't cut the mustard during that dark time in my collecting life.  This Zap, though, did survive.  And, again, I'm not really sure why.  I suspect it was because he was selling so cheaply that it simply wasn't worth my time to try and liquidate him.  But, I'm glad he was able to outlast the cull.  I still enjoy his colors.  And, I've always like Zap as a character.  This figure is a nice way to be able to use him with other early molds and not have be out of place like his 1991 Super Sonic Fighters release.  

I don't mind the Scrap Iron torso.  I think the overalls work for the Zap character.  They seem like something an antiquated bazooka man would wear.  It helps that they are nicely colored and even feature gold painted buckles.  Zap's torso, alone, features five distinct colors.  And, they are all done in a way that work with each other and the rest of the figure.  I'm sure this is personal preference.  But, I do find the colors to be eye-pleasing.  And, they work well on the chosen parts, too.

But, I've also found that when I go to use this figure, he's often still out of place.  The complexity of the convention paint jobs is too much of a stark contrast with the simplicity of many early vintage figures.  So, the later releases really only good among their peers.  This isn't bad since Hasbro remade so many swivel head figures during the Repaint Era.  And, this Zap even pairs well with the Pulse era figures from the 2020's.  So, that gives him more options for use.  I often see this guy sitting in his case with many other figures from the early 2000's.  And, I think to get him out for a photo shoot.  But, I then end up not doing it as I can't come up with any ideas for him.  I'll have to work on that as we go forward as this is a figure that I should showcase more often.  He's very well done and worthy of more use.

One of the sad realities of Joe in the 2000's was copyrights had lapsed.  So, this figure isn't, actually, Zap.  It's Raphael "Zap" Melendez.  It's one of the many silly convolutions Hasbro had to take to keep the characters in circulation.  But, almost 20 years removed from this figure's release and he's known by the more colloquial Zap name.  You know it's Zap.  I know it's Zap.  But, the lawyers can argue that it's not a copyright infringement on whatever IP squatter hoarded up expired names.  These names were more of an issue during the release years with some collectors becoming legitimately worked up that they had to appear in this manner.  That childishness seems to have dissipated in the ensuing decades.  But, it's a reminder that Joe collectors of the early 2000's could be petulant children over very stupid trivialities.  

This Zap is a hodge-podge of parts.  The head is from the 2004 Comic Pack Zap.  It's among the better Comic Pack heads and definitely looks more like Zap than his head from 1982.  The torso is from Scrap Iron.  His arms are from Thunder.  Many people aren't fans of these arms.  But, I'm quite fond of them as they look decent and provide some heft on older molds.  The legs are from Snow Job.  And, the waist is from Mutt.  The Mutt and Scrap Iron parts are from the 2004 era recasts that Hasbro made to release those figures in Toys R Us sets.  But, the overall parts combo works pretty well.  And, the different waist and legs really help Zap stand on his own and separate from the legacy of Scrap Iron.  

Zap's gear isn't great.  His only rifle is a grey version of a JvC era compact rifle.  It's actually a pretty good weapon.  It just doesn't really go with Zap.  The club tried to approximate Zap's necessary bazooka with a Sgt. Savage era spring loaded launcher.  The club tried to make Sgt. Savage accessories happen in 2007 and 2008.  The success was...mixed.  Some worked well enough.  But, most seemed out of place.  Even the Savage weapons that were originally intended for inclusion with the unproduced 1995 figures were designed with much larger parts in mind than the pre 1985 parts used on this Zap.  So, you have some really expensive accessories that didn't mesh with their figures.  And, Zap's overall accessory complement is pretty weak.  Fortunately, 1997 Zap or Short Fuze accessories work on this figure very well.  And, if you can get past the missing eye piece, the 2022 Duke Bazooka is another nice match for this Zap.  It sucks to have to go to the aftermarket to get meaningful accessories for a premium figure.  But, at least there are some nice options available for Zap.

As 2007 convention figures go, this Zap is pretty cheap.  While other figures from this set have crossed $300, Zap can be had for about $60.  Dealers still try to get $120 or more.  But, the time of this figure has passed.  The 2007 convention set had a moment in the sun.  And, some figures have remained very popular and still command stupid prices.  But, Zap is among the least popular members of this set...even if he's among the best figures.  So, you can get him cheaper if you have the patience to wait out the market.  I don't know if I'll go so far as to say this is the best swivel head Zap.  It's tough to beat the original.  And, the Funskool variants are all so much better.  But, this is a good figure.  Sadly, he's just not a $10, casual acquisition these days to find out.