Tuesday, July 2, 2019

2000 Rip It

The 1983 Hiss Driver isn't really an iconic figure.  He often sits in his tank and simply hides in the cockpit: away from prying eyes.  But, as an early release, he is often held in higher regard than he would be were he released a decade later.  Since the figure is relatively common (it was a mail away for years and the Hiss was super popular) there has never been a great clamor for multitudes of repaints.  But, the Hiss Driver was also a case where Hasbro accommodated early collectors by dropping a repaint into the A Real American Hero collection.  The new character of Rip It was an interesting take on the Hiss Driver mold that was somewhat neutered by the fact that a classic army builder was now a character.

Collectors immediately attacked Rip It's name.  Being released at a time when most collectors were in their early 20's ensured that the juvenile jokes doomed the character.  18 years later, you don't hear as much of the ridicule.  But, Hasbro's new characters of the early 2000's were so embarrassingly bad that they have been rightfully discarded on the line's scrap heap.  Rip It was no different and the opportunity to create a new Hiss Driver Commander was wasted on a guy who will leave his unit to fight G.I. Joe on his own and who learned his expert tank operation skills by playing golf.  (I wish I was making that up....)

At his core, the Rip It figure was designed to be more "Cobra" in the sense that Cobra was understood by Hasbro in 2000.  But, the practical release of Rip It was not Cobra blue and, instead, a purplish blue that really doesn't fit with any other Cobra releases of the day.  Offset by globs of red paint, Rip It seems like a really cheap knockoff of the Hiss Driver instead of something interesting and fun.  Because the figure screams of minimum effort and unfulfilled potential, though, he perfectly fits with the ARAHC figure of 2000 and 2001.  This line had so much promise...which was never delivered.  Collectors were so happy to have figures at retail that many of the flaws were overlooked at the time.  But, by 2001, the cracks were there and the Hiss III (something that should have been a sure thing at retail) stuck around at nationwide Toys R Us stores for months. 

While Rip It is considered a 2000 release, he didn't actually show up until January of 2001.  But, the timing of the 2nd wave of the ARAHC happened to coincide with the new year.  I had found all of the Wave II figures in late December of 2000.  So, the Hiss III was was the only thing really new to me as 2001 dawned.  I found it at a local TRU store and quickly bought one.  But, as soon as I got it home, the paint job and driver underwhelmed.  At the time, vintage Hiss Tanks and Drivers were plentiful and cheap.  The Hiss III was a downgrade from the original Hiss and Rip It was a flawed figure. My original plans to buy 5 or 6 of the new Hiss Tanks quickly turned to just the one and I never really regretted not picking up more for the $9.99 retail price.

It should be noted that Rip It features a different waist than the original Hiss Driver.  It's not as noticable as some other waist replacements on figures from the 2000's.  But, is something that creates a bit of incongruity if you army build both original Hiss Drivers and any subsequent release.  Rip It also has no accessories.  But, as he's supposed to be encased in the glass cockpit of a cheap and disposable tank, you can forgive the lack of gear. 

Rip It figures started cheap and remain so to this day.  Aside from the fact that the Hiss III was available for quite a while at Toys R Us, large quantities of Rip It figures were available for many years from Asian overstock sellers.  It was easy to buy up lots of 5 or 6 Rip It figures for a couple of bucks.  Many collectors of the mid 2000's partook in these lots and then proceeded to RIT dye the figures in various color combinations.  You can still find photos of many of these creations and they all showcase the unfulfilled potential of the Hiss Driver mold.  Hasbro used it just three times: in 1983, for this Rip It and then again on the 2007 Convention release.  There is also the 2003 unproduced Wal Mart Hiss Driver that is out there.  But, in the end, two of the four Hiss Driver uses are rare and exceptionally pricey.  He remains a possibility for factory custom makers just because there would be demand for all black, real crimson, desert and arctic repaints of the figure.

If you want a Rip It, dealers often price him high: mistaking the pricey Convention and unreleased Wal Mart figures for interest in the character rather than being indicative of their rarity.  You'll find plenty of loose figures at $18 price tags: with no buyers.  Left on his own, this is a $5 figure.  But, he's a lot harder to find on his these days.  Sadly, boxed Hiss III's have climbed in price.  So, it's not really feasible to buy up boxed items and open them to get cheap loose toys.  With patience, you can build a nice little army of Rip It figures.  But, there's no real reason to do so.  The figure lacks iconic colors, has flaws and sits in the shadow of the 1983 Hiss Driver.  But, it's at least an alternative paint job for a classic mold.

2000 Rip It, 2001 Hiss Driver, ARAHC, 1987 Maggot, 2018 Alley Viper, Night Viper, Black Major


2000, Rip It, 2001, ARAHC, Hiss Driver, 1983, Hiss Tank, Firefly, Red Laser Army, Cobra Trooper, JUMP, Jet Pack

2000, Rip It, 2001, ARAHC, Hiss Driver, 1983, Hiss Tank, Firefly, Red Laser Army, Cobra Trooper, JUMP, Jet Pack


2001 Rip It, Hiss Driver, Hiss IV, Worms, 1987, 2002 Shock Viper

3 comments:

  1. vintage hiss tanks were so easy to find in the early 2000s, for a long time i bought any of the ones that i came across. sagging cannons be damned, i had big plans to take a micromark saw to a couple and turn them into open back APCs for a squad of cobra troopers. i tried to fix a few sagging guns with strips of styrene which worked if you didn’t want them to ever raise or lower again. out of a couple dozen at least 15 were mint with good stickers, they were just everywhere and cheap. i miss those days and the ambition and excitement for this hobby...

    anyway, the Hiss III is soild but like many of us in our mid/late 20s at the time it was more economical to suck up the older ones, same with stingers. i only had a couple of them, if i remember the stickers came pre-applied (or were they pad printed? its been nearly 20 years) and didn’t require assembly which sucked the fun out of them a bit. the HISS driver has always been a figure that just takes up space in a cockpit and gets forgotten about, it’s really not a very good mold at all, those mid-theigh length boots are awful. Rip-It always occupied that same niche for me, bend the legs, close the canopy and forget about it. the convention one is definitely the best use of the mold and the wal-mart one is OK. over the years my old homie RTG has done some impressive work in his photos with various versions of the mold but the figure remains to be as it always has, a background figure in a massive expansive toyline.

    ReplyDelete
  2. I liked the figure and the tank just fine. They did have the weathering thing of the era going one. The HISS 3's treads were filthy (while the upper body is clean!) and I wonder if making a camo pattern for the tank wouldn't have been a better use of paint ops. Rip-It has a sooty overspray.

    Considering the previous Cobra vehicle release was the decent looking but mostly useless MAN-O-WAR (Barracuda), the HISS 3 was a nice item.

    Rip-It was an odd way to make a new character. Yes, HISS drives are often forgotten. In Rip-It's case there was no worries about silver paint rubs, though.

    ReplyDelete
  3. I feel like something about the vibrant red V1 HISS Driver works better with the tank than Rip It does. Personally I speculate the bright red color was intended to be noticeable against the black tank so that the HISS Driver would stand out as a focal point and perhaps add some play value in the way that you can easily see him. Rip It on the other hand is a blue figure who sits in a blue tank, which makes him less noticeable.

    But with that said I like this figure and as an alternative to the V1 HISS Driver, I think his colors put him on par with the original. I also really dig the larger Cobra symbol on his chest.

    ReplyDelete